Doing this in the right order matters more than the products. Work top-down on the topsides and bottom-up on the hull, and never let a cleaner dry on gelcoat in the sun.
1. Wash the bottom immediately
As soon as the boat is out of the water, pressure wash the bottom. Slime and early growth come off with water alone if you do it in the first hour; a day later you are scraping.
2. Attack the waterline
Use a dedicated hull cleaner on the stained band. Apply, let it dwell for the time on the label, agitate with a soft brush, rinse thoroughly. Wear gloves and eye protection — most of these are acidic. Never use them on polished stainless or anodised aluminium.
3. Wash the topsides
Marine soap, soft mitt, from the top down. Rinse before anything dries.
4. Assess the gelcoat
Rub a clean cloth over the hull. If it comes away chalky, the gelcoat is oxidised and needs compounding:
- Light oxidation: a one-step polish restores gloss.
- Medium: compound, then polish.
- Heavy: wet sanding by a professional, then compound and polish.
5. Protect
Marine wax or a synthetic sealant on the hull and topsides. This is what keeps the gelcoat from oxidising again over the winter.
6. Metal and glass
Polish stainless rails and cleats, then seal them. Clean isinglass with a plastic-safe cleaner and a soft cloth only — paper towel scratches it permanently.
7. Interior and canvas
- Vinyl: marine vinyl cleaner, then a UV protectant. Avoid silicone-heavy dressings that go slippery.
- Carpet and upholstery: extract, then dry completely before the boat is wrapped.
- Canvas: clean with a fabric-specific product, rinse well, dry fully, and re-proof if water no longer beads.
- Lockers and bilge: dry them out and leave moisture absorbers.
What to avoid
- Household bleach on gelcoat and canvas: it weakens stitching and dulls the finish.
- Pressure washing decals, canvas seams or through-hull fittings at close range.
- Working in direct sun: products flash-dry and streak.
Time and cost guide
A wash and wax on a mid-size boat is a half-day job. Oxidation removal on a neglected hull can take two days. Boats are always quoted by length and condition, not by a fixed price list — send photos of the waterline and hull for an accurate number.
Details on our boat detailing service, and see what gelcoat oxidation is if you are unsure what you are looking at.
Book in about two minutes. Interior detailing from CA$149, interior plus exterior from CA$170, before HST. Mobile service adds CA$20 and we come to you across Toronto and the GTA. Book my detail · Call 647-906-0004 · WhatsApp us
